OZ Lifting Mechanical Manual Chain Hoist, 1/4 Ton Cap. 10' Lift

The OZ Mechanical Chain Hoist is designed for commercial building sites, as well as various construction workplaces, such as warehousing, buildings, storage areas, and factories in general. The OZ Mechanical Chain Hoist can be easily mounted due to its lightweight construction. Don't let the low weight fool you, however. With a net weight of only nine pounds and a weight load limit of five hundred pounds, this chain hoist delivers big power in a compact frame. The chain hoist is made of only the highest quality materials and is tested thoroughly before it leaves the manufacturer. The chain hoist is easy to use and has a straightforward and well-marked "up" and "down" construction. Unlike products from most chain hoist suppliers, the OZ Mechanical Chain Hoist allows the operator to pull the load chain at any angle. With many other chain hoists, you have to be underneath or very close to the load chain to operate the hoist. However, with the chain hoist made by OZ Lifting Products, the operator could be standing at a distance or even above the chain hoist and still be able to pull the load chain and operate the hoist. Each chain hoist comes standard with a hook with a roller bearing in the bottom block, so users can turn the load without turning the load chain. Due to this, the load chain will never get tangled when the load turns or rotates. Every chain hoist comes standard with a cast forge steel hook and a heavy-duty safety latch. OZ Lifting Products is committed to the safety and security of your employees, and it shows in the quality and numerous safety features built into the chain hoist. Zinc plating inside the chain hoist ensures corrosion protection, while interior chain guides are protected. A chain cleaner and zinc-plated, no-oil chains prevent debris from accumulating. Each hoist comes with a test certificate and an owner's manual.